Yes, the "replace the control board" MAY work if you find a IDENTICAL HD. same model number, board revision. ect...
There are some weird extra formating things that may bugger it, like extra sector swapping (to slow down error's) but it *should* work.
The way Datarecovery services sometimes do it is:
to take out the Disk Platters and exchange with a replacement drive. Or use a controler replacement to "take over" the drive. (not cheap by any means)
Heck I once flashed a Pentium MB with the wrong BIOS and it still ran OK.
You'd be surprised how much abuse some hardware can take!
But you still have to have *GOOD* soldering skills and nerve and the 'replacement' board, unless someone feels generous enough to donate, eh?
OR
Check your IDE Channel on the motherboard ITSELF. Are you 100% positive that the HD is zapped? It could be JUST that channel thats borken (spelling intentional).
Also buy a better Power Supply. If it lets surges go right thru the rails to your HD... your CPU may be NEXT!
There are some weird extra formating things that may bugger it, like extra sector swapping (to slow down error's) but it *should* work.
The way Datarecovery services sometimes do it is:
to take out the Disk Platters and exchange with a replacement drive. Or use a controler replacement to "take over" the drive. (not cheap by any means)
Heck I once flashed a Pentium MB with the wrong BIOS and it still ran OK.
You'd be surprised how much abuse some hardware can take!
But you still have to have *GOOD* soldering skills and nerve and the 'replacement' board, unless someone feels generous enough to donate, eh?
OR
Check your IDE Channel on the motherboard ITSELF. Are you 100% positive that the HD is zapped? It could be JUST that channel thats borken (spelling intentional).
Also buy a better Power Supply. If it lets surges go right thru the rails to your HD... your CPU may be NEXT!